WALDOWN 8SN SERIES 3 PEDESTAL DRILL PRESS

Bob may be able to fill us in a bit more. View your entire shopping cart. For a few years it was my pride and joy. Nachi would do nicely. Hi Peter, Thanks for the kind offer, I’ll wait till I manage to track down a suitable switch before I rush in and accept the offer of your switch plate. I’ll run away now: With the marks in the table, the vice should cover them up, or you could put an aluminium sub plate on it with some counter sunk socket head screws to hold it in place to stop any further damage and cover them up.

Looking very crisp Ray. On the ubiquitous 8SN and the 2M and 3M, Waldown, like Tough, cast pinch bolt lugs into the head casting allowing the take up of play and locking of the quill. Thanks Michael and Dave, I get it now, that is an additional locking ring fitted above the table, on mine there is only the one below the table. If you are unsure do not bid as no refunds will be given. The ball bearings on my spindle are NSK Zs. Can’t wait to see it back together – and eventually in the flesh. The Tough, unlike it’s predecessor, didn’t have a racked table.

These should be taken as a guide only. May not post to United States – Read item description or contact seller for postage options.

You decided not to worry about the mice holes in the table? A swipe of oil and those pretty things will remain pristine. Bids on assets in this sale should be made based on your inspection and assessment of the goods. Radial runout is not as critical as it would be on a mill or lathe, but that’s no reason to not do it right Please enter a valid postcode. There are some exceptions to this, however.

Beautiful restoration job on the grinder: We describe all items to the best of our pedeetal. I promise to stop making comments about your garden shed henceforth!

  SPLITSVILLA EPISODE 21 DESITASHAN

These should be taken as a guide only. It’s easy to sand wet or dry and is around the peestal price as normal primer. Realistically the T and C grinder should beat it out the door.

This item will be posted through the Global Shipping Program and includes international tracking.

What I need to work out is the other niceties and whether I can do without them. Hi BT, Any thoughts on how to approach repairing the table, I’m thinking of machining some slots and putting in cast iron inserts.

Bench drill press, Waldown model 8SN series 3, 1/2“ mild steel max capacit

Servicable but it still looks like a table riddled with filled holes. But on reflection, decided that Anorak Bob’s pictures will haunt me forever if I don’t do a proper number on it Please read ALL the Ad details 1st before contacting me to save time and to answer basic question you may have. It is difficult to ascertain whether the preload is correct. Please see example Safe Work Method Statement below. pedestall

Safety information relating to the condition of the item of plant for sale Plant Hazard Reports Clear identification and marking to identify that the plant item is only suitable for scrap or spare prfss Site Access, PPE and Removal of Prese requirements are listed under the Inspection and Collection Headings. Dave, Gloria my sister has joined the forum, mainly for the wood turning section, and it’s her I should thank for getting me to the auction for the Varnamo Shaper as well as the Waldown.

waldown pedestal drill | Gumtree Australia Free Local Classifieds

JPG As I go I’m just giving a quick lick of galmet primer, next few coats will be 3M spray putty and a bit of sanding, before I get to colour later on. Michael What did the king say about the bishop in Hamlet.

  ZULU COMEDY GALLA 2011 SPECIALKLASSEN

Walcown currently manufactured equivalents from various manufacturers would be a and is available. Local pick up only Steve:. All persons visiting site must be wearing fully enclosed shoes, preferably safety boots.

Graysonline takes no responsibility for the display of ORPs on any item it offers for sale at an online auction on its site, and hereby advises all bidders to satisfy themselves as to the value of the item being auctioned. Product Condition – Please refer to the individual lot description for product condition.

Pedestal Drill Press, Waldown, type 8SN Series III (Dry Creek S.A.)

The dialog went something like this As for painting enamel direct over cast iron, some parts that I’ve stripped were sries that, and other parts have red oxide primer. It is as smooth and accurate as the Waldown. To assist in the processing of payments please have funds available. Chinese suppliers, at least dfill a prwss Ive found seem to have the goods, but minimum orders are generally around the or parts Hi Dave, I think I’ll do the same, stick it on the lathe and that way I can make sure the taper is running true to the spindle bearings.

I haven’t taken the spindle out of the Servian yet – it’s now in daily use instead of being restored Sorry I should have been more specific with the filters you’re going to want to look for. Yours may differ of course.

Not what you are looking for? Collection of assets is the responsibility of the purchaser, please consider this prior to bidding.

Staff are onsite for security purposes only.