From Naim web site: The speaker system is based on four compact satellites, supplied with stands, for the four corners of the room, a more or less conventional looking centre speaker which can be placed just above or below the TV screen, and a sealed box subwoofer. Look elsewhere if you want a system with the greatest feature count: Page 23 When first woken from standby, an av2 will hold either the default setup values or those that were in use when it was last shut-down. Surround sound via the AV2 is amazing – at the beginning of the film ‘The Gladiator’ there is a small Robin which flutters and flies away, I had never noticed it before but via the AV2 it was like the bird flew right past my ear – incredible sound detail. It has separate A-D and D-A converters and is equipped to handle 24 bit 96 kHz sound from music or movies. Bristol , Ships to:

It is possible this was just the optical cable I was using, but it could also be a problem with the input on the unit itself. The Naim AV2’s integrated power supply uses a custom design toroidal transformer with separate analogue and digital windings and additional screening which reduces RFI from the mains supply. For example, the usual forest of phono interconnections is largely absent though some phono inputs are available for compatibility with ‘foreign’ hardware , replaced by a range of different types of connector, including DIN and BNC, and some more exotic multiway connectors. Page 16 The test signal should be heard through the Main Left speaker. Normal amount of views. Solid state Tube View All Integrateds. To print the manual completely, please, download it.

The entire AV system should be switched off before connecting or disconnecting any inputs. There are systems that do more, and there are those that do at least some things better. Ayre Acoustics K-5xe MP.

The processor is smart enough to select the relevant decoding required. Cosmetically I would describe it as ‘immaculate’ however, there are two minor defects to be noted: This is a fundamental reason why video switching is not included in the AV2.


Solid state Tube View All Integrateds.

The av2 has a total of ten audio inputs: Microphonic sound quality degradation very much reduced by low-energy-transfer feet system and proprietary decoupling pillars for circuit board mounting. It is a multichannel audio processor, which can be used freestanding or as an adjunct to Naim’s NAC stereo preamplifi er.

Page 19 The following few paragraphs provide a short description sv2 explanation of each decode technology and mode available on the av2.

Scroll up or haim parameter list. L refers to the Main Left speaker and the numerical value its relative volume level. Page 14 Step 6.

Naim AV2 Processor/Preamplifier [Expired]

The subwoofer is solid and heavy, and has its own remote control and display which can be used for setup, and to adjust operation in day to day use. This is a sophisticated component, designed and built entirely in-house, and intended from the ground up for upgradeability. The manual volume knob works normally, but wobbles slightly to procfssor touch as I say, it works fine and you’ll probably never touch it anyway because most people use a remote, but it doesn’t feel quite as solid as a Naim knob should.

Despite its name, the AV2 does not include video processing.

Naim Audio System | TechRadar

For Excellent engineering Dynamic ability System is easy to ‘grow’. If this should occur with any Naim Processlr handset please contact your dealer for advice. Your dealer is responsible for making sure that the system sounds exactly as it should and information given here is not intended to reduce this responsibility in any way. TAC Time Aligned Analogue Filter Circuitry ; high grade, close tolerance Polystyrene capacitors and metal film resistors; and LED Display technology which is used to minimize electrical noise – the display can be turned off to further improve sound quality.


United Kingdom rpocessor, Custom Bundle: Microphonic degradation of sound quality is greatly reduced by our Naim low-energy-transfer feet system and unique decoupling pillars for circuit board mounting.

The av2 will store the last cinnema decode mode for each type of signal and for each input. Against Mundane surround decoding Control system not comprehensive.

NaimNon-Domestic Product: From Naim web site: Pressing the osd key will also cause the av2 display to scroll through the current state of each accessory option.

Comments to this Manuals Your Name: See Section 11 for notes on restoring setup defaults. Clearly the system is aimed at existing Naim customers, and at those for whom stereo music reproduction is as important as multichannel operation, but there is a great deal of flexibility in ciema this package can be configured.

I fi rst used the system in stereo mode. The Naim turns out to be a refined amplifier, with a decent but perhaps not exceptional surround sound decoder attached. It has separate A-D and D-A converters and is equipped to handle 24 bit 96 kHz sound from music or movies. It is very attractively styled and good cosmetic condition a yome dings and minor blemishes.

Naim AV2 Processor/Preamplifier | Solid state | Audiogon

Page 23 When first woken from standby, an av2 will hold either the default setup values or those that were in use when it was last shut-down. Cnema us on Facebook. The av2 display will now show VI2 on the left hand side and AN2 or one of twenty possible source component types on the right hand side. This manual also for: