ETATRON PKX SERIES

Both wall or foot installations using the universal support bracket supplied with the pumps Reduced dimensions for effective use of space in a dosing rig, ideal for OEM applications. The Online Industrial Exhibition. Liquid low level option available to prevent loss of prime. How many gallon in 1 liter? The answer is As general rule higher will be the pump flow rate lower is the counter pressure the pump will face.

The operation is simple the pump does not need lubrication, therefore maintenance is reduced almost to zero. Pump flow rate can be controlled manually by setting the pump pulse rate by means of the knob. Safe and easy priming and valve maintenance, included as a standard accessory is a bleed valve assembly, including return tubing available only on those models with manual air bleed head. Available also models at 12V d. Control panel protection assured by an adhesive polyester film, weather-proof and resisting UV rays. The operation is simple the pump does not need lubrication, therefore maintenance is reduced almost to zero. It has proven reliability and quality and due to it compact design and versatility the PKX series is the ideal solution for many chemical dosing application where moderate flow rate is required with counter pressures up to 6 bar 87 psi. The flow rate of the pump will depend on the counter pressure in the discharge line please check flow vs.

Excellent water resistant for tough applications. When the piston of the electromagnet is attracted, a pressure is produced in ftatron pump body with an expulsion of liquid from the discharge valve. Control panel protection assured by an adhesive polyester film, weather-proof and resisting UV rays. Pump flow rate can be controlled manually by setting the pump pulse rate by means of the knob.

  SADADARA JOTHI FILM

When the piston of the electromagnet is attracted, a pressure is produced in the pump body with an expulsion of liquid from the discharge valve. Liquid low level option available to prevent loss of prime. After tank filling and when the level sensor contact closes the pump will restart.

Etatron PKX Solenoid Dosing Pump & Fluid Metering Pump | Castle Pumps

Open the catalog to page 6. After each pump pulse is finished a plx brings the piston back to the initial position, with a recall of liquid through the suction valve. Silent version available upon request. As general rule higher will be the pump flow rate lower is the counter pressure the pump will face. The Online Industrial Exhibition.

PP polypropylene Injection valve sleeve: This model is a reed contact proportional dosing system controlled from an external contact-free sensor such as a pulsed output flow meter. Etatron PKX series chemical dosing systems are used where a measured amount of a chemical antiscalant or sanitising agent such as liquid chlorine is required to be added to a feedwater stream.

The operation is simple the pump does not need lubrication, therefore maintenance is reduced almost to zero. A connected level control causes swries dosing pump to stop if the chemical level in the supply tank is low.

This version includes a feed tank level sensing setting control. How many mm in 1 inches? Control panel protection assured by an adhesive polyester film, weather-proof and resisting UV rays.

Converting between gallon [US, liquid] and liter. Available also models at 12V d.

The answer is Two optional features include a volumetric proportional dose 1 injection per 1 input pulse or a volumetric dose with a timer programmable injection timer for each impulse received from the external sensor with a timer range of 0 to 60 seconds. Safe and easy priming and valve maintenance, included as a standard accessory is a bleed valve assembly, including return tubing available only eeries those models with manual air bleed head.

  BENTLEY MOTORS WATCH A25082

It has proven reliability and quality and due to it compact design and versatility the PKX series is the ideal solution for many chemical dosing application where moderate flow rate is required with counter pressures up to 6 bar 87 psi. Safe and easy priming and valve maintenance, included as a standard accessory is a bleed valve assembly, including return tubing available only on those models with manual air bleed head. A connected level control causes the dosing pump to stop if the chemical level in the supply tank is low.

How many gallon in 1 liter? Diaphragms are of superior construction, robust PTFE machined part not bonded composite layers, for optimum flexibility and long durability.

Etatron PKX 05-05 MA/A Chemical Dosing Pump

Liquid low level option available to prevent loss of prime. PP Suction line foot valve: Thus air bubbles are prevented from entering the suction line and the dosing head. Silent version available upon request. Both wall or foot installations using ssries universal support bracket supplied with the pumps Reduced dimensions for effective use of space in a dosing rig, ideal for OEM applications. FPM Viton Injection valves: Thus air bubbles are prevented from entering the suction line and the dosing head.

The alarm LED lights.

Stroking rate gives very high rate of reproducible metering accuracy. How many psi in 1 bar?